D-Link DHP-W306AV User Manual page 27

Section 3 - Configuration
Channel Width:
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Transmission Rate:
Select the transmission rate. Best (automatic) is recommended for best performance.
Enable Hidden
Check the box if you do not want the SSID of your wireless network to be broadcasted by the DHP-W306AV. If checked,
Wireless:
the SSID of the DHP-W306AV will not be seen by site survey utilities, so your wireless clients will have to know the SSID
of your DHP-W306AV in order to connect to it.
Security Mode:
Refer to page 43 for more information regarding wireless security.
Enable:
Enables the Wi-Fi Protected Setup feature.
Lock Wireless
Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN.
Security Settings:
Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network
settings with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager
user.
Current PIN:
Shows the current value of the access point's PIN.
Generate New
Create a random number that is a valid PIN. This becomes the access point's PIN. You can then copy this PIN to the user
PIN:
interface of the user.
Reset PIN to Default:
Restores the default PIN of the access point.
Reset to
Resets Wi-Fi Protected Status to Not Configured. The Vista WPS icon will only be displayed when the Wi-Fi Protected
Unconfigured:
status is Not Configured.
D-Link DHP-W306AV User Manual 27