Table of Contents
Advertisement
21-1850.RC.fm Page 15 Tuesday, September 19, 2000 3:06 PM
USING THE QUIET FEATURE
The quiet feature eliminates interference from other
radios which are not tuned to the same quiet code as
your radio. When you set a quiet code (1–38) and
turn on this feature, you can only communicate with
users who have a radio set to the same channel and
code as your radio.
1. Hold down
until
QUIET
quiet code flashes.
2. Hold down 8 or 9 until you see the code num-
ber you want to use (see "Quiet Codes" on
Page 17).
3. Press
to store the code.
QUIET
To turn on the quiet feature, press
appears. To turn off the feature, press
QUIET
disappears.
Note: For the most effective communication, select a
quiet code from 7 to 30. If you select a code outside
that range, you must wait 1 to 2 seconds after holding
down
before you start talking.
PTT
Operation
QUIET
appears and the
so
QUIET
QUIET
so
QUIET
15
Advertisement
Table of Contents
