Network Setup - D-Link mydlink DNR-322L User Manual

Section 3 - Configuration
DHCP: Select this connection if you have a DHCP server
running on your network and would like a dynamic
IP address to be automatically updated to your NVR.
Static IP: You may obtain a static or fixed IP address and
other network information from your network
administrator for your NVR. A static IP address will
simplify access to your NVR in the future.
IP Address: The fixed IP address.
The default value 255.255.255.0 is used to
Subnet Mask:
determine if the destination is in the same subnet.
Gateway IP
The gateway forwards frames to destinations in a
Address: different subnet. Invalid gateway settings may cause
the failure of transmissions to a different subnet.
DNS1:
Primary domain name server that translates names
to IP addresses.
DNS2: Secondary domain name server to backup the
primary one.
PPPoE Enable this setting if your ISP (DSL service) is using
Settings: PPPoE. You may already have a Username and Password provided by your ISP, or you may need to contact your ISP. The connection
status will be determined automatically by the system.
DHCP server:
Enable or disable the DHCP server. If your network doesn't have a DHCP server, enable NVR DHCP server for easier local network setup.
D-Link DNR-322L User Manual
Network Setup
35