Raid - D-Link mydlink DNR-322L User Manual

Section 3 - Configuration
NVR will show the information of installed HDDs first. Click Next to select new RAID configuration.
Choose from four different hard drive configurations in this section. Begin by clicking Set RAID Type and Re-Format.
Note: All data will be lost during this process.
Standard:
Creates two separate volumes (or one volume if
only one hard drive is present). Each hard drive
has its own volume.
Note:
Only Standard mode can create the Volume2,
which is available as a File (Samba) Server. Use the
NVR Search utility to mount the File server to your
Windows system.
JBOD:
Combines both hard drives in a linear fashion
which will create one large volume geared towards
maximum available space.

RAID 0:

Combines both hard drives in a striped fashion
which will create one large volume geared towards
maximum performance.
RAID 1:
Mirrors the hard drives for redundancy. If one hard
drive fails, the other still has all the data. Replace
the failed hard drive and it will re-mirror, restoring
maximum data protection.
D-Link DNR-322L User Manual
RAID
52