Product Specific Problems - Dell P2314Tt User Manual

Specific What You
Symptoms Experience
Cursor does
not accurately
Windows 7 and
follow your
Windows 8
finger when
Calibration
you touch the
screen

Product Specific Problems

Specific What You
Symptoms Experience
Image is
centered on
Screen image is
screen, but does
too small
not fill entire
viewing area
Cannot adjust
the monitor OSD does not
settings using appear on the
the buttons on screen
the front panel
No input signal
No picture, the
when controls
light is white.
are pressed
The picture
The picture
cannot fill the
does not fill the
height or width
entire screen.
of the screen
40 Troubleshooting
Possible Solutions
1. Open Control Panel, open Hardware and
Sound, and then open Tablet PC Settings.
2. Select Calibration.
3. Follow the instructions to recalibrate your
screen
Possible Solutions
• Check the aspect ratio in Image Setting OSD
menu
• Reset the monitor to factory settings.
Turn off the monitor, disconnect and reconnect
the power cable, and turn on the monitor.
• Check the signal source.
• Make sure the computer is not in power saving
mode, by moving the mouse or pressing a key on
the keyboard.
• Make sure your computer or other video-output
device is powered on and playing video media.
• Make sure the display cable connecting the
monitor to the computer is connected properly
and is secure.
• Unplug and replug the display cable.
• Restart the computer or video player.
• Due to different video formats and aspect ratios
of DVDs, the monitor may not display the video
in full screen.
• Run the built-in diagnostics.