Dell P2314Tt User Manual page 28

Menu and Submenus
Saturation
Reset Color Settings
Display Settings
Aspect Ratio
Horizontal Position
Vertical Position
Sharpness
Pixel Clock
Phase
Dynamic Contrast
Reset Display Settings
28 Operating the Monitor
Description
This feature adjusts the color saturation of the video image.
Use or to adjust the saturation from 0 to 100.
Press to increase the monochrome appearance.
Press to increase the colorful appearance.
NOTE: Saturation adjustment is available only for video
input.
Resets your monitor's color settings to the factory defaults.
Adjust the image ratio to Wide 16:9, 4:3, or 5:4.
Adjusts the horizontal position of the image.
Use the and buttons to change the image position.
Adjusts the vertical position of the image.
Use the and buttons to change the image position.
Makes the image look sharper or softer.
Use or to adjust the sharpness.
The Phase and Pixel Clock adjustments allow you to adjust
your monitor to your preference.
Use the and buttons to adjust for best
image quality.
If satisfactory results are not obtained using the Phase
adjustment, use the Pixel Clock (coarse) adjustment and
then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only
available when your monitor is connected using the VGA
cable.
Dynamic Contrast adjusts the contrast ratio to
8,000,000 : 1.
Push the button to select the Dynamic Contrast "On"
or "Off".
Restores the display settings to factory defaults.