D-Link AirPlus G+ DI-824VUP+ Manual page 57

Using the Configuration Menu
Tools > System
The current system settings can be saved as a file onto the local hard drive. The saved
file or any other saved setting file created by the DI-824VUP+ can be uploaded into the
unit. To reload a system settings file, click on "Browse" to search the local hard drive
for the file to be used. The device can also be reset back to factory default settings by
clicking on "Reset to Default" button. Use the restore feature only if necessary. This will
erase previously saved settings for the unit. Make sure to save your system settings
before doing a factory restore.
Save Settings to
Local Hard Drive
Load Settings from
Local Hard Drive
Restore to Factory
Default Settings
Click Save to save the current settings to the local Hard Drive.
Click Browse to find the settings file, then click Load.
Click Restore to restore the factory default settings.
57