D-Link AirPlus DI-714P+ Manual page 28

Using the Configuration Menu
Advanced > Performance
Beacon Interval-
RTS Threshold-
Fragmentation-
DTIM interval-
TX Rates-
Preamble Type-
Authentication-
Open System -
Shared Key -
Both -
Beacons are packets sent by an Access Point to synchronize a
wireless network. Specify a value. 100 is the default setting and
is recommended.
This value should remain at its default setting of 2432. If incon-
sistent data flow is a problem, only a minor modification should
be made.
This value should also remain at its default setting of 2346
(Delivery Traffic Indication Message) 3 is the default setting. A
DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages.
Select the data rate
Select short or long preamble
Select Open system or Shared Key
The DI-714P+ will be visible to all devices on the network. This is
the default setting
In this mode, in order to access the DI-714P+ on the network,
the device must be listed in the MAC Address Control List
In this mode, all devices on the network can access the
DI-714P+
28