Table of Contents
Advertisement
Chapter 3 - Getting Started
3.1 - Turning your LCD TV On and Off
1. Plug the power cord into an AC wall socket.
2. Press the POWER button on the front panel or the POWER button on the remote control
to power on the LCD TV. The POWER indicator on the front panel will light green.
3. Select the input source for the LCD TV using the Input button on the remote control.
4. If connecting to antenna, cable or other RF source on TV inputs, see page 19-20 to
configure the product to receive all available channels.
3.2 - Installation of Wall Mount (Optional)
If you would like to mount your L13e LCD TV to the wall, you can contact V, Inc. directly or your
local dealer to obtain the appropriate wall mounting kit. To convert your LCD TV from a desk-
mounted to a wall-mounted display, follow the instructions below:
1. Disconnect Power.
2. Lay the LCD TV face down on a towel or blanket to protect the
screen from damage.
3. Press gently on the 2 concave portions of the back bezel near the
stand hinge with both your thumbs (see Figure 3.2.a)
4. Pull the stand cover towards you to
detach it from the back panel of the
TV and remove the cover completely
(see Figure 3.2.b and 3.2.c).
5. Unscrew the 4 set screws (see Figure 3.2.d).
6. Remove the stand from the back of the TV (see Figure 3.2.e).
7. Attach the LCD TV to the wall, following the instructions with the
wall-mounting kit.
Version - 9/23/2004
Fig. 3.2.b
17
Fig. 3.2.a
Fig. 3.2.c
Fig. 3.2.d
Fig. 3.2.e
Advertisement
Table of Contents
