Transporting; Before Loading; Loading - Honda HS624 Owner's Manual

TRANSPORTING
Before loading
1. Loading the snowblower on a trailer should be performed on a firm, level
surface.
2. Use a loading ramp that is strong enough to support the combined
weight of the snowblower and the operator:
Weight of snowblower : (Operating weight)
HS624
HS828
TA 84 kg (185 Ibs) TAS
116 kg (256 Ibs)
WA 88 kg (194 Ibs) WAS 105 kg (231 Ibs)
3. The loading ramp must be long enough so that its slope is 15O or less:
4. If the truck bed has a low roof or cover, with less than 1.5 m (4.9 ft) of
headroom, lower the chute guide for better clearance, or remove the
chute assembly.
5. Check that there is sufficient fuel in the tank. Engine may stall on the
ramp if there is little fuel in the tank.
Loading
1. Step on the foot pedal, and raise the auger to the HIGH position (Track
type : P.15).
2. Maneuver the snowblower into line with the loading ramp.
42