Programming The Ip-Ext16 Card; Assigning The Ip Addressing Information - Panasonic Hybrid IP-PBX Manual

4.1 Programming the IP-EXT16 Card

4.1 Programming the IP-EXT16 Card
4.1.1

Assigning the IP Addressing Information

When an IP-EXT16 card is placed on the LAN for the first time, it is necessary to assign IP addressing
information to the card. This is done by using the KX-TDA Maintenance Console.
Notes
• It is assumed that you have already installed the KX-TDA Maintenance Console to your PC.
• The contents and design of the software are subject to change without notice.
• Screen shots reprinted with permission from Microsoft Corporation.
28 Information about IP Proprietary Telephones
1. Start the KX-TDA Maintenance Console from the Start
menu.
2. a.
Type the Installer Level Programmer Code
(INSTALLER).
b.
Click OK.
Click Connect → RS-232C or USB.
3. a.
b.
On the next screen, type the system password for
installer (default: 1234).
c.
Click OK.
The program menu appears.
4. a.
Double-click Configuration.
b.
Double-click Slot.
c.
Click Status of the IP-EXT16 card.
d.
Set the status to OUS.
e.
Click Card Type of the IP-EXT16 card.
a.
5.
In the IP Address box, type the IP address of the
card *1 .
b.
In the Subnet Mask box, type the subnet mask
address of the network
c.
Click OK.
d.
Click Status of the IP-EXT16 card.
e.
Set the status to INS.
*2 .