Installing A Parallel Interface - Fujitsu PRIMERGY TX100 S1 Options Manual

Installing a parallel interface

7.2 Installing a parallel interface
Ê Open the server (seesection
Ê Remove the screw from the slot cover for slot 1.
Ê Pull the slot cover up and out.
V
CAUTION!
Keep the slot cover in a safe place. If you remove the parallel interface
again and do not replace it with a new one, then reinstall the slot cover
to comply with EMC regulations and to satisfy cooling requirements and
fire protection measures.
Figure 16: Extension of the slot cover
Ê Attach an extension bracket wit one screw to the slot cover of the parallel
interface.
34
Expansion cards and parallel interface
"Opening the server" on page
Options Guide
17).
TX100 S1