Installing An Expansion Card - Fujitsu PRIMERGY TX100 S1 Options Manual

Installing an expansion card

7.1 Installing an expansion card
Ê Open the server (see section
Figure 14: Removing the slot cover
Ê Remove the screw (see circle).
Ê Pull the slot cover up and out.
V
CAUTION!
Keep the slot cover in a safe place. If you remove the expansion card
again and do not replace it with a new one, then reinstall the slot cover
to comply with EMC regulations and to satisfy cooling requirements and
fire protection measures.
32
Expansion cards and parallel interface
"Opening the server" on page
Options Guide
17).
TX100 S1