Fill Level Control And Rear Brake Fluid - RIEJU RS3 50 Owner's Manual

Ofrecido por www.electromanuales.com

FILL LEVEL CONTROL AND REAR BRAKE FLUID

If for any reason you need to fill the brake fluid
Proceed as follows:
1 - Remove the pump cover (A).
2 - Remove the rubber seal (see picture section and fill level control
front brake fluid).
3 - Fill until the liquid exceeds the MIN mark on the viewing port (B).
Recommended fluid: DOT 4 Recommended fluid : DOT 4
ADVICE ADVICE
Ensure the rubber seal is replaced before refitting cap.
CAUTION CAUTION
To completely replace the fluid braking system
please contact your official RIEJU
70
RS3 50
RIEJU dealer.
A
B
MAINTENANCE