Control And Adjustment Of The Gear Pedal; Gear Change Pedal - RIEJU RS3 50 Owner's Manual

Ofrecido por www.electromanuales.com

GEAR CHANGE PEDAL

GEAR CHANGE PEDAL

CONTROL AND ADJUSTMENT OF THE GEAR PEDAL

To adjust the position of the shifter follow these
steps:
1 - Loosen the nuts (A).
2 - Remove the 2 screws (B) holding the shift lever assembly.
3 - Rotate the assembly (support the rod) for height adjustments in
either direction.
4 - Check if the desired height has been achieved for easy use.
5 – Re tighten the 2 screws (B).
6 - Set the position by locking nuts (A).
MAINTENANCE
B
A A
59
RS3 50