Related Manuals for Audio Technica SpectraPulse drm141
Summary of Contents for Audio Technica SpectraPulse drm141
- Page 1 SpectraPulse ™ Ultra Wideband Wireless Microphone System drm141 Digital Receiver Module aci707 Audio Control Interface mtu101 Microphone Transmitter Unit cei007 Charging /Encryption Interface Set-up and Operation...
- Page 2 This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with INDUSTRY CANADA R.S.S. 210, en conformité avec IC: RSS-210/CNR210. Operation is subject to the following conditions: 1) This device may not cause harmful interference and 2) this device must accept any interference received, including interference which may cause undesired operation.
-
Page 3: Table Of Contents
Contents SpectraPulse System Features SpectraPulse UWB Wireless Microphone System Components SpectraPulse System Installation & Operation drm141 Digital Receiver Module aci707 Audio Control Interface mtu101 Boundary Microphone Transmitter Unit cei007 Charging/Encryption Interface drm141 Digital Receiver Module Controls and Functions aci707 Audio Control Interface Front Panel Controls and Functions aci707 Audio Control Interface Rear Panel Controls and Functions mtu101 Boundary Microphone Transmitter Controls and Functions cei007 Charging/Encryption Interface Controls... - Page 4 SpectraPulse ™ Components and Included Accessories The SpectraPulse ™ UWB wireless microphone system consists of four components: the drm141 Digital Receiver Module, designed for ceiling- or wall-mount; the aci707 Audio Control Interface, which is designed to be rack-mounted; the mtu101 Boundary Microphone/Transmitter; and the cei007 Charging/Encryption Interface (optional).
-
Page 5: Drm141 Digital Receiver Module
System Installation & Operation Thank you for purchasing the Audio-Technica SpectraPulse ™ UWB wireless microphone system. It is our hope that the system will bring you years of trouble-free performance. Please follow the information contained in this manual closely, as it will assist you in using your equipment effectively. -
Page 6: Mtu101 Boundary Microphone Transmitter Unit
aci707 Audio Control Interface (continued) 4. For each audio channel you will use (this equals the number of microphone transmitters in use), connect a cable to the corresponding Audio Output on the rear of the aci707. Each aci707 provides seven channels of audio output for connection to your external equipment (mixers, recording devices, teleconferencing equipment). -
Page 7: Cei007 Charging/Encryption Interface
cei007 Charging/Encryption Interface The cei007 Charging/Encryption Interface has two functions: The cei007 is a 7-bay charger for SpectraPulse ™ mtu101 Boundary Microphone Transmitters using the supplied rechargeable AA Nickel Metal Hydride (NiMH) batteries. It is able to charge up to seven mtu101 units (14 AA NiMH batteries) either separately or together in about 6 hours. LEDs show charging status at all times. -
Page 8: Drm141 Digital Receiver Module Controls And Functions
drm141 Digital Receiver Module Controls & Functions Unlike a typical wireless system that uses a separate receiver for each channel, the SpectraPulse ™ drm141 assembled as shipped UWB Wireless Microphone System uses a single Digital Receiver Module for 14 channels. The drm141 functions as both the UWB receiver and antenna. - Page 9 drm141 Digital Receiver Module Controls & Functions (continued) Note: The unit is shipped assembled in the supplied plastic rear housing. Before installing Mounting to a 3-gang Electrical Box the drm141 in a 3-gang electrical box, you must first remove it from the supplied plastic rear housing, as follows: •...
-
Page 10: Aci707 Audio Control Interface Front Panel Controls And Functions
aci707 Audio Control Interface Front Panel Controls and Functions Power Switch Press this button in to turn the unit on; the aci707 Audio Control Interface LEDs will light. Press again to turn the unit off. RS232 Connector for Encryption Use for optional encryption. (See SpectraPulse ™... -
Page 11: Aci707 Audio Control Interface Rear Panel Controls And Functions
aci707 Audio Control Interface Rear Panel Controls and Functions The aci707 Audio Control Interface operates via the safety-approved IEC power cord supplied Power Cord for connection to 110/120V AC 50/60Hz power. You must change to an approved power cord for operation in non-U.S. locations (in which case, the aci707 will operate properly from 100/240V AC 50/60Hz for worldwide use). - Page 12 aci707 Audio Control Interface Rear Panel Controls & Functions (continued) DIP Switch Configuration Settings The rear-panel DIP switch provides a variety of setup options. DIP Switches 1 & 2 – microphone/transmitter button function A soft-touch mute button on the front of each SpectraPulse ™...
- Page 13 mtu101 Boundary Microphone Transmitter Controls The mtu101 Boundary Microphone Transmitter operates on two AA batteries (standard alkaline Battery Selection and Installation or rechargeable). Please make certain that your batteries are fresh or fully charged. Two AA 1.5V alkaline batteries are included with each transmitter. SANYO rechargeable 2700 mAH NiMH AA batteries (preferred for best battery-life performance) are included with the optional cei007 Charging/Encryption Interface.
-
Page 14: Cei007 Charging/Encryption Interface Controls
cei007 Charging/Encryption Interface Controls Power Cord The cei007 Charging/Encryption Interface operates via the safety-approved IEC power cord supplied for connection to 110/120V AC 50/60Hz power. You must change to an approved power cord for operation in non-U.S. locations (in which case, the cei007 will operate properly from 100/240V AC 50/60Hz for worldwide use). -
Page 15: Specifications
Specifications † System Specifications Frequency Bandwidth 500 MHz Center Frequency 6.350 GHz AD/DA 16 bits Sampling Rate 24 kHz Latency 1.1 ms Sync/Re-acquisition Time 3 ms Range 75 feet Simultaneous Channels Power Input 100-240 VAC, 50/60 Hz System Frequency Response 100 -12,000 Hz mtu Specifications Microphone Element... - Page 16 One -Year Limited Warranty Audio-Technica professional wireless systems purchased in the U.S.A. are warranted for one year from date of purchase by Audio-Technica U.S., Inc. (A.T.U.S.) to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of equal or superior value if delivered to A.T.U.S.