Load Sensing - Sensor Logic - AEG FAVORIT 60870 User Instructions

Cancelling the start delay:
As long as the programme has not started you are able to cancel the
start delay. Continue pressing the DELAY TIMER button until the length
of the selected programme appears in the multi-display. The selected
programme will start immediately.
Changing the programme after the start delay has been set:
As long as the programme has not started, you can still change the
start delay set by pressing a programme button.
0 1. Press the button for the new programme and hold it down.
First the indicator for the programme that has just been selected will
flash.
After several seconds only the indicator for the new programme will be
flashing.
2. Release the programme button.
The newly selected programme will start automatically following a
countdown of the hours set.
Load Sensing – Sensor Logic
If a wash programme is started even though there are only a few dishes
in the upper and/or lower basket, an intelligent electronic system
adjusts the amount of water and the duration of the wash programme
to the number of dishes. By this means it is possible to wash only a few
dishes quickly and economically. At half load (6 place settings), up to
2 litres of water and 0.2 kWh of electricity are saved.
Operating Instructions
31