AEG ÖKO FAVORIT 60750 VI User Instructions
Fully integrated dishwasher
Hide thumbs
Also See for ÖKO FAVORIT 60750 VI:
- User instructions (44 pages) ,
- User instructions (44 pages)
Related Manuals for AEG ÖKO FAVORIT 60750 VI
Summary of Contents for AEG ÖKO FAVORIT 60750 VI
- Page 1 ÖKO_FAVORIT 60750 VI The Dishwasher That Can Be Fully Integrated User Instructions...
- Page 2 In the event of a malfunction, these operating instructions contain information on how to rectify faults yourself, see the "What to do, if..." section. If these instructions are insufficient, please contact your AEG Service Force Centre. In this respect please read the chapter "Service & Spare Parts".
-
Page 3: Table Of Contents
Contents CONTENTS Operating Instructions ........Safety Instructions . - Page 4 Contents Technical Data ..........31 Notes for Test Institutes .
-
Page 5: Operating Instructions
Operating Instructions OPERATING INSTRUCTIONS Safety Instructions The safety aspects of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. Neverthe- less, as a manufacturer we consider it our obligation to make you aware of the following safety information: Installation, Connection and Placing into Operation •... -
Page 6: Correct Use
• If the mains lead is damaged, or is to be replaced for a longer lead, the cable (obtainable from AEG Service Force) must be changed by a service engineer authorised by AEG. • Never unplug the appliance by pulling on the cable, always pull the plug. -
Page 7: Disposal
Operating Instructions • Do not sit or stand on the open door, the appliance may tip over. • In the event of a fault, first close the tap, then switch off the appli- ance and unplug it from the mains. If the appliance is permanently wired to the mains: remove the fuse. -
Page 8: Economical And Ecological Dishwashing
Operating Instructions Economical and Ecological Dishwashing • Only connect the dishwasher to the hot water supply if your hot water is not electrically heated. • Ensure that the water softener is correctly adjusted. • Do not pre-rinse dishes under running water. •... -
Page 9: Appliance Features, Display And Control Fields
Operating Instructions Appliance Features, Display and Control Fields Top Spray Rubber Seal for Connecting the Water Feed to the Upper Spray Spray Arms Container for Salt Container for Rinse Aid Detergent Dispenser Display and Control Fields Rating Filters Plate... -
Page 10: Display And Control Fields
Operating Instructions Display and Control Fields Display of the Function Softener Start Delay Set Button Button Indicators Display for the Individual Control Field Set the Start Programme Steps Delay The Control Field comprises the ON/OFF switch and the programme buttons with LED indicators. Softener and Function Button: in addition to the wash programme marked, it is also possible to adjust the dishwasher's water softener using the combination of these buttons. -
Page 11: Adjust The Water Softener
Operating Instructions Adjust the Water Softener To avoid the scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft, i.e. low lime content, water. The dish- washer therefore has a built-in water softener, in which tap water from a hardness of 4 °d (German degree) is softened with the aid of special salt. -
Page 12: Filling With Salt For The Water Softener
Operating Instructions increases the hardness setting by 1. 5. Pressing the water softener button (Exception: hardness setting 0 follows hardness setting 9). 6. When the hardness setting is correct, press the ON/OFF switch. The hardness setting is then saved. Filling with Salt for the Water Softener Use only special salt for dishwashers. -
Page 13: Filling With Rinse Aid
Operating Instructions 6. Turn the lid clockwise to the stop, otherwise dishwasher salt will leak into the wash water, this could lead to poor wash results. To avoid this run a rinse programme after filling the salt container with special salt. This will wash away salt water and any salt crystals that have been spilt. -
Page 14: Adjusting Rinse Aid Dosing
Operating Instructions 4. Fill with rinse aid exactly up to the level marked “max”; this corresponds to a quantity of approx. 140 ml. 5. Close the lid and press until it locks into place. 6. Wipe up any spilt rinse aid with a cloth. -
Page 15: In Daily Use
Operating Instructions In Daily Use • Check the salt and rinse aid levels. • Load cutlery and dishes into the dishwasher • Fill with dishwasher detergent • Select a wash programme suitable for the cutlery and dishes • Start the wash programme Loading Cutlery and Dishes Sponges, household cloths and any object that can absorb water should not be washed in the dishwasher... -
Page 16: Loading Cutlery
Operating Instructions – To avoid damage to glasses, they must not touch – Do not lay small objects (e.g. lids) in the cutlery rack Loading Cutlery Long, pointed items of cutlery are a hazard if placed in the cutlery bas- ket, particularly to children (see Safety Instructions). - Page 17 Operating Instructions Place forks and spoons that do not fit in the cutlery tray in the cutlery basket. To ensure that all items of cutlery in the cutlery basket are properly washed, you should 1. place the grid insert on the cutlery rack 2.
-
Page 18: Loading Pans, Frying Pans And Large Plates
Operating Instructions Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rack. To ease the loading of large items at some dishwasher-models the two rows of prongs for the right-hand plate insert can be folded down: 1. -
Page 19: Loading Cups, Glasses And Coffee Services
Operating Instructions Loading Cups, Glasses and Coffee Services Load small, delicate items and long pointed cutlery in the upper rack. • Arrange items of crockery on the folding cups racks so that they are offset from each other and water can reach all items. -
Page 20: Adjusting The Height Of The Upper Basket
Operating Instructions Adjusting the Height of the Upper Basket Maximum Height of the Dishes in the Upper Basket Lower Basket With upper basket raised 22 cm 31 cm With upper basket lowered 24 cm 29 cm The height of the basket can also be adjusted when it is loaded. Depending on the model, your appliance is provided with one of the following types of upper basket: Lowering the Upper Basket:... -
Page 21: Filling With Detergent
Operating Instructions Filling with Detergent Only use dishwasher detergent. Fill with detergent: – Prior to the start of a wash programme (not for the pre wash pro- gramme). The detergent is released into the wash water during the programme. Please observe the manufacturer's dosing and storage recommenda- tions as stated on the detergent packaging. -
Page 22: Bio Wash Programmes And Concentrated Detergents
Operating Instructions Bio Wash Programmes and Concentrated Detergents Based on their chemical composition, dishwasher detergents can be split into two basic types: – Conventional, alkaline detergents with caustic components – Weak alkaline concentrated detergents with natural enzymes. The use of BIO wash programmes in conjunction with concentrated detergents reduces pollution and is good for your dishes;... -
Page 23: Selecting The Wash Programme (Programme Table)
Operating Instructions Selecting the Wash Programme (Programme Table) Choose the most suitable wash programme with the aid of this table: Type of Coffee Service and Dessert Dinner Service and Cooking Utensils Dishes Dishes In Addition with non-tem- perature resist- with delicate glasses ant dishes Type of •... -
Page 24: Start The Wash Programme
Operating Instructions Start the Wash Programme 1. Open the door of the dishwasher. 2. Check that when the dishes and cutlery are loaded into the dishwasher the spray arms are free to rotate. 3. Open the tap fully. 4. Press the ON/OFF button. The indicator in the ON/OFF button illumi- nates. -
Page 25: Interrupting The Wash Programme (Only In Emergencies)
Operating Instructions Interrupting the Wash Programme (only in emergencies) Interrupt a wash programme in progress only when it is absolutely necessary to do so. When the appliance is closed again, the air that has entered the appliance is heated and expands significantly. As result water may penetrate into the base of the appliance and trigger the leak prevention system. -
Page 26: Load Sensing - Sensor Logic
Operating Instructions Load Sensing – Sensor Logic If a wash programme is started even though there are only a few dishes in the upper and/or lower rack, an intelligent electronic system adjusts the amount of water and the duration of the wash programme to the number of dishes. -
Page 27: Care And Cleaning
Operating Instructions Care and Cleaning Do not under any circumstances use furniture care products or aggres- sive cleaners. • If necessary, clean the controls only with a soft cloth and pure warm water. • The spray arms do not need cleaning. •... -
Page 28: What To Do, If
Operating Instructions 7. Put the flat filter back in the base of the washing compartment 8. Place the coarse/fine filter in the microfilter and press together. 9. Put the filter combination in place and lock by turning the handle clock- wise to the stop. -
Page 29: Warning Tones Indicating A Fault In The Dishwasher
The wash programme should continue. If the same warning tone is heard again, please contact AEG Service Force. • If more than two repetitive warning tones are heard after the pro- gramme start, please contact AEG Service Force. -
Page 30: There Are Problems With The Operation Of The Dishwasher
Mains plug is not plugged in. Insert mains plug. Dishwasher interior Light bulb for the interior lighting does not work. Contact AEG Service Force. lighting is defective..the wash result is not satisfactory. The dishes are still dirty. – The wrong wash programme was selected. -
Page 31: Technical Data
Operating Instructions The dishes are wet and dull. – Rinse aid was not used. – The rinse aid container is empty. There are streaks, milky spots or a bluish coating on glasses and dishes. – Decrease rinse aid dosing. There are dried water drops on the glasses and dishes. –... -
Page 32: Notes For Test Institutes
Operating Instructions Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test programme (see Programme Table). Tests in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see Programme Table). -
Page 33: Installation And Connection Instructions
Installation and Connection Instructions INSTALLATION AND CONNECTION INSTRUCTIONS Installing the Dishwasher • The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level. • To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrew- ing:... -
Page 34: Fitting The Furniture Door Panel
Installation and Connection Instructions Fitting the Furniture Door Panel (see installation template supplied) The door of the appliance can be fitted with a furniture door panel of the following dimensions: Width: 591 mm – 594 mm Thickness: 16 mm – 24 mm Height: max. -
Page 35: Connecting The Dishwasher
Installation and Connection Instructions Connecting the Dishwasher Water Connection The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations. • The dishwasher can be connected to cold and hot water supplies up to max. -
Page 36: Water Drain
– Minimum required height 30 cm above the lower edge of the machine. Extension hoses • Extension hoses are available from AEG Service Force. The internal diameter of the extension hoses must be 19 mm to ensure that the function of the appliance is not impeded. -
Page 37: Leak Prevention System
Installation and Connection Instructions Leak Prevention System For protection from damage due to water leaks, the dishwasher is equipped with a leak prevention system, the AQUA CONTROL SYSTEM. In the event of a fault, the safety valve immediately interrupts the sup- ply of water to the appliance and the drain pump switches on. -
Page 38: Electrical Connection
Installation and Connection Instructions Electrical Connection Any electrical work required to install this appliance should be car- ried out by a qualified electrician or competent person. WARNING - This appliance must be earthed. The manufacturer declines any responsibility should these safety measures not be observed. -
Page 39: Connections
Installation and Connection Instructions Connections The water inlet and drain hoses, as well as the mains cable must be con- nected beside the dishwasher as there is insufficient space behind the appliance. The plumbing and electrical installation example given below can only be regarded as a recommendation. -
Page 40: Guarantee Conditions
3. Should guarantee repairs be necessary the purchaser must inform the nearest customer service office (manufacturer´s service or authorised agent). AEG reserves the right to stipulate the place of the repair (i. e. the customer´s home, place of installation or AEG workshop). -
Page 43: Service And Spare Parts
Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service calls. Customer Care For general enquiries concerning your AEG appliance or for further information on AEG products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.aeghome.co.uk. - Page 44 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 822 946 149 - 00 - 1201 Subject to change without notice...