Table of Contents
Advertisement
Interrupting the Wash Programme
(only in emergencies)
Interrupt a wash programme in progress only when it is absolutely
3
necessary to do so. When the appliance is closed again, the air that
has entered the appliance is heated and expands significantly. As result
water may penetrate into the base of the appliance and trigger the leak
prevention system.
Hot steam may escape from the appliance when opening the door.
1
Open the door carefully.
0
1. Open the door of the dishwasher.
2. Rectify the reason for opening the appliance.
3. Close the door. The selected programme will then continue.
Load Sensing – Sensor Logic
If a wash programme is started even though there are only a few dishes
in the upper and/or lower basket, an intelligent electronic system
adjusts the amount of water and the duration of the wash programme
to the number of dishes. By this means it is possible to wash only a few
dishes quickly and economically. At half load (6 place settings), up to
2 litres of water and 0.2 kWh of electricity are saved.
Operating Instructions
25
Hide quick links:
Advertisement
Table of Contents
