Scanning Channels; Reading The Kinetic Wave Display - Radio Shack Wireless Indoor/Outdoor Thermometer Owner's Manual

Scanning Channels

1. Hold down
CHANNEL
main unit scans from one channel to another.
The display updates the channel and tempera-
ture every five seconds.
2. Press any key to stop the automatic scan. The
current channel and temperature appear.
READING THE KINETIC WAVE
DISPLAY
The kinetic wave display appears directly above the
channel number on the main unit's display. The wave
shows the status of the signal being received by the
main unit.
When the dot appears alone, the main unit is not re-
ceiving a signal. When the arcs appear one after an-
other, the main unit is searching for (or receiving a
signal from) the selected channel's remote sensor.
14
Operation
for about two seconds. The