Operation - Radio Shack Wireless Indoor/Outdoor Thermometer Owner's Manual

ˆ

Operation

Once you install batteries in the remote sensor and
the main unit, the remote sensor's temperature ap-
pears and it transmits signals to the main unit about
every 30 seconds. The main unit searches for those
signals.
The temperature measured at the main unit appears
on the bottom right of the display. Once the main unit
receives the remote sensor's signal, the temperature
measured at the remote sensor appears in the center
of the display. The main unit's information updates
about every 30 seconds.
Kinetic Wave Display — See "Read-
ing the Kinetic Wave Display" on
Page 14.
Remote
Sensor
Channel
Number
MAX/MIN Indicator — See "Checking Maximum/
Minimum Temperatures" on Page 15. In this il-
lustration, 87.4 F is the highest temperature re-
corded at the remote sensor set to channel 2.
12
Operation
Remote Sensor
Temperature
Main Unit
Temperature