Sonar Tab; Alarms Tab - Garmin GPSMAP 580 Owner's Manual

Main Menu

Sonar Tab

Use the Sonar tab to set up and configure sonar. See the
and Using Sonar" section.
NOTE: You must have a transducer connected to your GPSMAP
580/585 to use sonar.
Main Menu—Sonar tab
56

Alarms Tab

"Setting Up Use the Alarms tab to define alarm settings. When an alarm goes off,
the alarm message appears on the GPSMAP 580/585 and the unit
emits five (5) beeps.
To set an alarm:
1. On the Main menu, highlight the Alarms tab.
2. Select the alarm to set, and press Enter.
3. Change the setting to On, and press Enter. If necessary,
highlight the next field to the right, and press Enter. Enter
the settings you want.
4. Press Enter.
Main Menu—Alarms tab
GPSMAP 580/585 Owner's Manual