Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Garmin FF 350 Plus
Summary of Contents for Garmin FF 350 Plus
- Page 1 FF 350 Plus Owner’s Manual...
- Page 2 © 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
-
Page 3: Table Of Contents
Adjusting the Backlight ............... 1 Changing the Color Mode ............1 Setting the Beeper ..............1 Panning on the FF 350 Plus ............1 Home Screen ..............2 Customizing the Home Screen ........... 2 Adding the Data Graphs or Temperature Data Graphs Screen .................. -
Page 5: Introduction
Alarms Only. Select to scroll, highlight options, and move the cursor. Select to pause sonar. Panning on the FF 350 Plus You can move the sonar view to view an area other than your Select to zoom in to a view. -
Page 6: Home Screen
From the home screen, select Customize Home > Add. Garmin ClearVü Sonar View Select Depth Data Graph or Temperature Data Graph. NOTE: To receive Garmin ClearVü scanning sonar, you need a Pages Shortcuts compatible transducer. You can quickly open commonly used pages by selecting PAGE Garmin ClearVü... -
Page 7: Split-Screen Frequency
Depth indicator as the sonar data screen scrolls from right to left Bottom echo Traditional transducers emit a conical beam. The Garmin ClearVü scanning sonar technology emits two narrow beams, similar to the shape of the beam in a copying machine. These beams provide a clearer, picture-like image of what is around the boat. -
Page 8: Reducing The Clutter
Reducing the Clutter • To display higher-sensitivity, weaker sonar returns with more noise automatically, select Auto High. You can quickly change the settings to reduce noise and clutter • To display medium-sensitivity sonar returns with moderate on the sonar screen. noise automatically, select Auto Med. -
Page 9: Sonar Setup
Select Sonar Setup > Overlay Numbers > Show. Sonar Setup NOTE: Not all options and settings apply to all models, sounder modules, and transducers. Showing and Adjusting the Depth Line You can show and adjust a horizontal line on a sonar screen. The depth of the line is indicated on the right side of the screen. -
Page 10: Device Configuration
Auto Power: Turns on the device automatically when power is applied. Device Configuration Language: Sets the on-screen language. System Information: Provides information about the device and FF 350 Plus Settings Menu Tree the software version. • System Simulator: Turns on the simulator. ◦ Display System Information ◦... -
Page 11: Setting The Water Temperature Offset
Complete an action, based on the location of the transducer: If you continue to get the message, contact Garmin product support. • If the transducer is installed at the water line , measure the distance from the transducer location to the keel of the Alarms Settings boat. -
Page 12: Ff 350 Plus Specifications
• Keep the original sales receipt, or a photocopy, in a safe Troubleshooting place. My device does not turn on FF 350 Plus Specifications • Push the power cable all the way into the back of the device. Even if the cable seems to be connected, you should push Item Measurement firmly so that it is fully seated. -
Page 13: Index
6 event log 6 factory settings 6, 7 Garmin ClearVü 2 home screen 2 customizing 2 keel offset 6 keys 1 power 1 language 6 menu 6 noise rejection 4 overlay numbers 4, 5 pages 2. See sonar panning 1 product registration 7... - Page 14 00800 4412 454 +47 815 69 555 +44 2380 662 915 +35 1214 447 460 +386 4 27 92 500 0861 GARMIN (427 646) +34 93 275 44 97 +27 (0)11 251 9800 + 46 7744 52020 +886 2 2642-9199 ext 2...