Reboot; Password - TP-Link TL-WR642G User Manual

•
Click the Restore button.
Note: The current configuration will be covered with the uploading configuration file. The
restoration process lasts for 20 seconds and the router will restart automatically. Keep
the router on during the restoring process, to prevent any damage.

5.11.5 Reboot

This page (shown in figure 5-52) allows you to reboot the router.
Click the Reboot button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
•
Change LAN IP Address. (System will reboot automatically)
•
MAC Clone (system will reboot automatically)
•
DHCP service function.
•
Static address assignment of DHCP server.
•
Web Service Port of the router.
•
Upgrade the firmware of the router (system will reboot automatically).
•
Restore the router's settings to factory default (system will reboot
automatically).

5.11.6 Password

This page (shown in figure 5-53) allows you to change the factory default user name and
password of the router.
It is recommended strongly that you change the factory default user name and password
TL-WR642G 108M Wireless Router User Guide
Figure 5-52 Reboot the router
Figure 5-53 Password
- 59 -