TP-Link TL-WR642G User Manual page 34

TL-WR642G 108M Wireless Router User Guide
Figure 5-15 Wireless Settings
SSID - Enter a value of up to 32 characters. The same name (SSID) must be
assigned to all wireless devices in your network. The default SSID is TP-LINK, but
it is recommended strongly that you change your networks name (SSID) to a
different value. This value is case-sensitive. For example, TP-LINK is NOT the
same as tp-link.
Region - Select your region from the pull-down list. This field specifies the region
where the wireless function of the router can be used. It may be illegal to use the
wireless function of the router in a region other than one of those specified in this
field. If your country or region is not listed, please contact your local government
agency for assistance
The default region is United States. When you select your local region from the
pull-down list, Click the Save button, then the Note Dialog appears. Click OK.
- 29 -