TP-Link TL-WR642G User Manual page 14

108mbps wireless router

Hide thumbs Also See for TL-WR642G:

Table of Contents

Figure 4-1 Successful result of Ping command

If the result displayed is similar to that shown in figure 4-2, it means that your PC has not

connected to the router.

Please check it following these steps:

Is the connection between your PC and the router correct?

Note: The 1/2/3/4 LEDs of LAN port which you link to on the router and LEDs on your

PC's adapter should be lit.

Is the TCP/IP configuration for your PC correct?

Note: If the router's IP address is 192.168.1.1, your PC's IP address must be within

the range of 192.168.1.2 ~ 192.168.1.254, the gateway must be 192.168.1.1

TL-WR642G

Figure 4-2 Failed result of Ping command

108M Wireless Router User Guide

- 9 -

Table of Contents