Symbols - Homelite Versa Tool UT20818 Operator's Manual

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME
Safety Alert Symbol
Read Your Operator's Manual
Wear eye and hearing protection.
Keep bystanders away.
Ricochet.
No blade.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations
with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
DANGER:
serious injury.
WARNING:
injury.
CAUTION:
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
NOTE:
Advises you of information or instructions vital to the operation or maintenance of the equipment.

SYMBOLS

Indicates an imminently hazardous situation which, if not avoided, will result in death or
Indicates a potentially hazardous situation which, if not avoided, could result in serious
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
SAVE THESE INSTRUCTIONS
EXPLANATION
Indicates danger, warning or caution. It means
attention!!! Your safety is involved.
Your manual contains special messages to
bring attention to potential safety concerns,
machine damage as well as helpful operating and
servicing information. Please read all the
information carefully to avoid injury and machine
damage.
Wear eye protection which is marked to comply
with ANSI Z87.1 as well as hearing protection
when operating this equipment.
Keep all bystanders at least 50 feet (15 m)
away.
Danger of Ricochet.
Do not install any type of blade on this unit.
Page 4