Using The Alert Function - Radio Shack Weatheradio Owner's Manual

low the steps in "Selecting a Broadcast Frequency"
on Page 17.
To listen to a weather broadcast,
make sure is
PROGRAM/OPERATE
set to , press ,
OPERATE WEATHER
then adjust to the desired
VOLUME
listening level. To turn off the
weather broadcast, press
WEATH-
again.
ER

USING THE ALERT FUNCTION

When the NWS broadcasts a warning, watch, or
statement, the Weatheradio sounds an alert tone,
and the STATEMENT (if the broadcast is a state-
ment), WATCH (if the broadcast is a watch), or
WARNING (if the broadcast is a warning or emer-
gency) indicators light.
Warning: If severe weather threatens, do not wait
for an alert tone; turn on the weather broadcast and
monitor the weather information.
23