Moving And Positioning - Dyna-Glo RA18LPDG User Manual

1. push in gas control knob slightly and turn clockwise
2. Turn gas supply off by turning propane tank valve clockwise
never store a propane gas tank inside a building or in the vicinity of any gas or oil burning appliance.
when the propane tank is not disconnected from the construction heater, the gas tank and heater must be
stored outdoors in a well ventilated area, out of the reach of children. if for any reason the heater is to be
stored indoors, the tank must be disconnected and stored outdoors in a well ventilated area out of reach of
children, in accordance with the standard for the the Storage and handling of liquefied petroleum gases,
anSi / nFpa 58 and CSa B149.1, natural gas and propane installation Code. The plastic tank valve plug
supplied with your tank must be tightly installed when the tank is disconnected from the heater.
MOVING AND POSITIONING HEATER
There is a brake in each of the front wheels of your heater that helps keep it in place when in use. To engage
the brakes, push the lever down on each wheel. To move the heater, release the brakes, simply by flipping the
levers on both brakes up.
11
PROPANE CONSTRUCTION HEATER
SHUTDOWN INSTRUCTIONS
Turning burner only OFF
Turn control knob clockwise
STORAGE
to "oFF" position. do not force. (a)
to close.
(pilot stays lit).
to "piloT" position. (B)