Pppoe - Edimax BR-6204Wg User Manual

Click <OK> when you have finished the configuration above.
Congratulations! You have completed the configuration for the Fixed-IP x
DSL connection. You can start using the router now, if you wish to use
some of the advance features supported by this router see chapter 2, 3, 4.

1.3 PPPoE

Select PPPoE if your ISP requires the PPPoE protocol to connect you to
the Internet. Your ISP should provide all the information required in this
section.
Parameter
User Name
Password
Service Name
MTU
Description
Enter the User Name provided by your ISP for the
PPPoE connection
Enter the Password provided by your ISP for the
PPPoE connection
This is optional. Enter the Service name should your
ISP requires it, otherwise leave it blank.
This is optional. You can specify the maximum size of
your transmission packet to the Internet. Leave it as it
is if you to not wish to set a maximum packet size.
18