Web Interface; Administrative Configuration 4 - Comtech EF Data MR-S2 Installation And Operation Manual

Digicast Media Router S2 Receiver CMR-5975 (MR-S2)
Software Upgrade
A.2

Web Interface

Access the
Administrative Configuration
a) In the
Update Firmware
b) Select
Application
c) Enter a valid username and password in the
the
Update Firmware
begin to download.
Do NOT power the unit down during the upgrade process.
IMPORTANT
d)
When the update is complete, the message "
will be displayed.
e)
Once the unit is upgraded, reset the unit by entering a valid username and
password in the first
menu (Figure A-1):
section, enter the
or for the
FPGA Image Type
section) then select
section, then selecting
Login Required
A–2
Unit TFTP Server IP Address
to be upgraded.
section (below
Login Required
. The software update will
Update
Press any key to continue
Reset Unit
Revision 1
MN-0000032
.
"
.