Redundancy Menu; Figure 4-21. Main Menu - Comtech EF Data MR-S2 Installation And Operation Manual

Digicast Media Router S2 Receiver CMR-5975 (MR-S2)
Device Management via User Interfaces
4.3.3

Redundancy Menu

Redundancy is available when two units are used to ensure reliable service in the event of a
failure or loss of signal. The units are configured in Primary/Backup roles and communicate
between each other via cable connected to each unit's redundant port.
Other Unit's IP Address
Enter the IP address of the unit to be used in conjunction with this unit for redundant
functionality.
Mode
Select the mode of this receiver (Primary, Backup, Disabled).

Figure 4-21. Main Menu

4-28
Revision 1
MN-0000032