Remove The Dcp; Re-Attach The Dcp - Clarion CZ300 Owner's Manual & Installation Manual

Remove the DCP

The control panel can be detached to prevent
theft. When detached, keep it in a safe place
where it will not be subject to scratches.
We recommend taking the DCP with you
when leaving the car.
1. Press the [ ] button (2 sec.) to turn off
the power.
2. Depress the [OPEN] button to unlock the
DCP.
3. Grab the edge that pops out and remove
the DCP.

Re-attach the DCP

1. Hold the DCP and ensure that the panel
faces towards you. Set the right side of
the DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
• The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it or
subject it to strong shocks.
• Once the [OPEN] button is pressed and DCP is unlocked, car vibrations can cause the DCP
to fall.
• The connector connecting the source unit and the DCP is an extremely important part. Be
careful not to damage it by pressing on it with ngernails, screwdrivers, or other hard objects.
Note:
If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
CAUTION
7