Itunes Tagging - Clarion CZ300 Owner's Manual & Installation Manual

®
iTunes Tagging
The CZ300 offers iTunes
allows the user to "Tag" songs playing
on HD Radio ™ stations for purchase later
through iTunes. When you press the [ISR]
button, the unit stores the title and artist song
information that can then be transferred to
your iPod when connected to the unit. A list
titled "Tagged" will appear in iTunes, allowing
you the option to purchase your tagged
songs.
Note:
®
"iTunes Tagging" function works by
connecting THD300 (sold separately).
iPod compatibility
For detailed information on the playable iPod
models, see our home page: www.clarion.
com
Note:
• iPhones can also be connected to this
system and "iPod" appearing in this
manual should be referred to as "iPod/
iPhone".
• This system will not operate or may
operate improperly with unsupported
versions.
Tagging music
To begin tagging music, tune to an HD Radio
station. The DIGITAL icon at the display must
be illuminated, indicating a digital station
is being received. TAG icon lights up when
Tagging function is ready. Press the [ISR]
button on the unit. Proper tagging depends
very much on good radio reception. If the
reception is poor, tagging will be affected.
"STORE ##/64" will appear in the display.
The song information is saved to the unit
memory until an iPod is connected. You can
tag up to 64 songs before the tags must be
transferred to an iPod or deleted. When the
Tag memory reaches capacity (64 tags) the
bottom of the screen displays "MEMO FULL".
Table 5: TAG Messages
Tag Message Reason
If the Tags data is ready, and
STORE ##/64
the [ISR] button is pressed
SENDING ## Tags data is sending to iPod
MEMO FULL Tag storage is full
DEFFICIENT Tag data is not available
®
Tagging, which
IPOD FULL iPod memory is full
An iPod without Tagging
NOT SUPPORT function is connected and the
[ISR] button is pressed
Note:
Tags saved to your iPod can be managed
using the iTunes software, available at www.
apple.com/itunes.
Downloading tags to your iPod
To download tags to your iPod, plug an
iPod into the unit. All existing tags are
automatically transferred to the iPod and
deleted from the head unit's memory. If an
iPod is connected when a song is tagged,
the Tag will be immediately transferred to the
iPod.
Note:
When transferring Tags to an iPod, the unit
must remain in Radio mode. To purchase
tagged songs, you must sync your iPod to
iTunes and then click the "Tagged" list on the
left side of the iTunes software screen. Click
the "View" button for purchasing information.
Note:
1. How to enter the iTunes tagging function?
"TAG" and "DIGITAL" light up when
Tagging function is ready, press the [ISR]
button to start iTunes Tagging.
2. What is seen on the radio's display to let
me know I have tagged the tune?
Press the [ISR] button to show
"STORINGTAG". After connect to a iPod,
the display shows "SENDING 01".
If no connection with iPod, the display will
show "STORE ##/64". You could save
64 Tag into E2PROM in total. When you
connect to a iPod, Tag information will
be saved in the iPod, and the data in
E2PROM will be cleared.
3. Then how do I get the tagged tune from
my iPod to the computer?
If you have install iTunes, connect your
iPod to your computer and buy songs
online.
15