Installing The Transformer - Brinkmann Metal Owner's Manual

INS_828-0302-0_Metal

INSTALLING THE TRANSFORMER

Photo
Sensor
WARNING: FIRE HAZARD: Do not coil cable
around transformer. Excess cable between
transformer and 1st light shall be coiled
outside of the weatherproof outlet cover
or buried.
WARNING: RISK OF ELECTRICAL SHOCK:
Do not mount transformer within 10 feet
of pool, spa or other water sources.
IMPORTANT INFORMATION
If lights do not come on
3
11/3/08 6:02 PM Page 4
Step 1
Install the transformer photo sensor outdoors away from other
light sources such as porch lights or street lights. These light
To First Light
sources may keep the dawn to dusk photocell sensor from
activating the lights automatically at night.
WARNING: Do not use an extension cord or a dimmer switch.
NOTE: DO NOT PLUG IN THE TRANSFORMER UNTIL
Step 2
Plug the transformer into a covered Class A GFCI receptacle that
has an enclosure which is weatherproof with the attachment plug
cap inserted or removed.
WARNING: Transformer and fixtures must be installed in
compliance with national and all local electrical codes and
ordinances.
TROUBLESHOOTING &
1. Make sure transformer is plugged into outlet and the power
to electrical outlet is ON.
2. Make sure photo cell is not exposed to bright light.
3. Make sure photo cell sensor is not in a heavy shadowed area
or in artificial light.
4. Make sure all connectors on the cable and transformer are
properly connected.
LIGHTS HAVE BEEN SET UP AND CONNECTED.