Daikin Quaternity H-Series Engineeiring Data page 15

Capacity Tables
Symbols
AFR : Airflow rate
BF : Bypass factor
EWB : Entering wet bulb temp.
EDB : Entering dry bulb temp.
TC : Total capacity
SHC : Sensible heating capacity (kW) / (kBtu/h)
PI : Power input
14
Note:
(m /min.) 1. Ratings shown are net capacities which include a deduction for indoor fan
3
motor heat.
2.
3. TC, PI and SHC must be calculated by interpolation using the figures in
(°C) / (°F)
the above tables. (Figures out of the tables should not be used for
(°C) / (°F)
calculation.)
4. About SHC which are not mentioned on the table, please calculate them
(kW) / (kBtu/h)
with around values in direct proportion.
5. Capacities are based on the following conditions.
Corresponding refrigerant piping length : 25ft (7.5 m)
(kW)
Level difference : 0ft
6. Airflow rate (AFR) and Bypass factor (BF) are tabulated above table.
7. Cooling capacity at -10 degrees Celsius / 14 degrees Fahrenheit.
shows nominal (rated) capacities and power input.
Temp: Celsius / TC, SHC, PI: kW
INDOOR OUTDOOR
EWB EDB -10 (°CDB)
°C °C TC SHC PI
14.0 20 3.66 2.70 0.46
Temp: Fahrenheit / TC, SHC: kBtu / PI: kW
INDOOR OUTDOOR
EWB EDB 14 (°FDB)
°F °F TC SHC PI
57.2 68.0 12.49 9.21 0.46
EDUS04-906_b
3D063100A
Room Air Conditioners H-Series