Table of Contents
Advertisement
Command Specifications
g.
RAC (report check) (not supported)
The IDD is not supported in this bit. Therefore, the IDD always report "0",
and ignore specified value.
h.
SWP (soft write protect) (not supported)
This bit specifies whether or not to execute for the device server write
operation to the medium.
The IDD is not supported this bit. Therefore, the IDD always report "0", and
ignore specified value.
i.
RAERP, UAAERP, EAERP, READY AER HOLDOFF PERIOD
(not supported)
These field specify the action method of asynchronous event reporting
protocol.
The IDD is not supported these field. Therefore, the IDD always report '0',
and ignore specified value.
j.
Extended self-test completion time
This field contains advisory data that an application client may use to
determine the time in seconds that the device server requires to complete an
extended self-test when the device server is not interrupted by subsequent
commands and no errors occur during execution of the self-test.
This field only use to report the value by the MODE SENSE / MODE
SENSE EXTENDED command.
Therefore, the IDD ignores specified value by the MODE SELECT / MODE
SELECT EXTENDED command.
4-54
C141-C009
Advertisement
Table of Contents
