Connecting Wires To Terminals - Kenwood KDC-133 Instruction Manual

Connecting Wires to Terminals

Fuse (10A)
Wiring harness
(Accessory1)
Power control wire (Blue/White)
Motor antenna control wire (Blue)
TEL mute wire (Brown)
FRONT • L
FRONT • R
REAR • L
REAR • R
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
Rear left output (White)
If no connections are made, do not let the wire come out from the tab.
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
ACC
Rear right output (Red)
FM/AM antenna input
When using the optional power amplifier, connect to
P.CONT its power control terminal.
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna,
ANT.
CONT
or to the power terminal for the booster amplifier of
the film-type antenna.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
MUTE
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Car fuse box
Ignition key
switch
Car fuse box
(Main fuse)
+ Battery
–
13
|
English