Advertisement
Tip: You can advance or back up the picture frame-byframe by pressing b / B repeatedly during PAUSE mode. The picture frame-by-frame in reverse is not
available for Video CD. 32 Slow Motion HDD -R +R DVD -RWVR VCD -RWVideo +RW Repeat A-B HDD -RWVR -RWVideo +RW 1. Press PAUSE/STEP
(X) during playback. The HDD/DVD Recorder Receiver will now go into PAUSE mode. 2. Use the SCAN (m or M) to select the required speed. DVD, HDD; 4
steps (forward and backward) Video CD; 3 steps (forward only) 3. To exit Slow Motion mode, press PLAY (B). -R +R DVD VCD To repeat a sequence.
1. Press REPEAT A-B at your chosen starting point. " A * " appears briefly on the TV screen. 2. Press REPEAT A-B again at your chosen end point.
"A B" appears briefly on the TV screen and the repeat sequence begins. 3. Press REPEAT A-B again to cancel. Note: During HDD playback, you cannot
Press RANDOM during playback. The unit automatically begins Random Playback and "RANDOM" appears on the TV screen. 2. To return to normal
playback, press RANDOM until "NORMAL" appears on the TV screen. Tip: By pressing SKIP ] during Random playback, the unit selects another title (track)
and resumes Random playback. Notes: This function only works with DVD Karaoke discs or video CDs without PBC. On a Video CD with PBC, you must set
PBC to OFF in the Setup menu to use the Random function. See page 25. Time Search HDD -R +R DVD -RWVR DivX -RWVideo +RW To start playing at
The time search box shows the elapsed playing time. 2. Press v / V to select the time clock icon and "0:00:00" appears. 3. Input the required start time in
hours, minutes, and seconds from left to right. If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then enter the
Repeat HDD +R DVD -RWVR VCD -RWVideo +RW -R Zoom HDD +R DVD -RWVR VCD -RWVideo +RW -R Press REPEAT to select a desired repeat
mode. [Chapter] repeats the current chapter. (DVD only) [Title] repeats the current title. (DVD, HDD only) [All] repeats the all titles/tracks on the VR mode
(Video CD only) [OFF] does not play repeatedly. Note: On a Video CD with PBC, you must set PBC to [OFF] in the Setup menu to use the Repeat function.
See page 25. The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1.
Press ZOOM during playback or still playback to activate the Zoom function. Each press of the ZOOM button changes the TV screen in the sequence shown
below. x1 size x2 size x4 size x1 size (normal size) 2. Use the b / B / v / V buttons to move through the zoomed picture. 3. To resume normal playback, press
CLEAR or press ZOOM repeatedly until the normal picture appears. Note: The zoom function may not work for some DVDs. 33 Playback Marker Search
HDD DVD -RWVR VCD -RWVideo +RW -R +R Disc Menu DVD 1. Press MENU/LIST. The disc menu is displayed.
2. To remove the disc menu, press MENU/LIST again. To enter a Marker You can start playback from up to six memorized points. To enter a marker, press
MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to six markers. To Recall or Clear a Marked
Scene 1. During disc playback, press SEARCH. The marker search menu appears on the screen. 2.
Use b / B / v / V to select a marked scene that you want to recall or clear. 3. Press ENTER and playback starts from the marked scene. Or, press CLEAR and
the marked scene is erased from the marker search menu. Camera Angle DVD If the disc contains scenes recorded at different camera angles, you can change
2. To exit still motion mode, press PLAY.
select a sequence less than 5 seconds. Random Karaoke DVD VCD 1.
any chosen time on the disc: 1. Press DISPLAY twice during playback.
correct numbers. 4. Press ENTER to confirm. Playback starts from the selected time.
DVD-RW, or Video CD. [Track]: repeats the current track.
to a different camera angle during playback.
Press ANGLE then press b / B repeatedly during playback to select a desired angle.
Advertisement
