Grounding Instructions - HoMedics JetSpa BL-200 Instruction Manual And Warranty

• Use of this product should be pleasant and comfortable. Should pain or
discomfort result, discontinue use and consult your physician.
• Never use while sleeping or drowsy.
• Always unplug the unit when filling or moving the unit.
• Ensure that your hands are dry when operating the controls or removing the plug.
• This product should NEVER be used by any individual suffering from any
ailments that would limit the user's capacity to operate the controls.
• This product should NEVER be used by any individual suffering from any
ailments that would limit or altogether inhibit the user's capacity to feel or
have any sensation in the body part that the product is being used for.
• Consult your doctor before using this unit if you have diabetes, as diabetes
can contribute to foot problems including decreased feeling or circulation to
the feet. Given the existing risk of foot problems for diabetics, this unit must
not be used prior to consulting your doctor.

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for the electric current to
reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
6
DANGER
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Grounding Pin
Check with a qualified electrician or serviceman if
Figure A
you are in doubt as to whether the product is prop-
erly grounded. Do not modify the plug provided
with the product - if it will not fit the outlet, you may
temporarily use an adaptor (such as the one shown
Tab for
in Figure B) until you have a proper outlet (such as
Grounding
Adapter
Screw
the one shown in Figure C) installed by a qualified
Figure B
electrician.
This product is for use on a nominal 120-volt circuit, and
Grounded
Outlet
has a grounding plug that looks like the plug illustrated in
Figure A. A temporary adapter that looks like the adapter
illustrated in Figure B may be used to connect this plug to
a 2-pole receptacle as shown in Figure D if a properly
Figure C
grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet
Figure C can be installed by a qualified electrician. The tab
for grounding screw Figure B extending from the adapter
Metal Screw
must be connected to a permanent ground such as a
Figure D
properly grounded outlet box cover. Whenever the adapter
is used, it must be held in place by a metal screw. See
Figures D and E.
All servicing of this footbath must be performed by
Figure E
authorized HoMedics service personnel.
7