Activating And Deactivating The Flow-Based Redirect Feature Through Vendor-Specific Attributes; Configuring Flow-Based Redirect For A Traffic Class Service - Cisco Intelligent Wireless Access Gateway Configuration Manual

Activating and Deactivating the Flow-Based Redirect Feature Through Vendor-Specific Attributes

Activating and Deactivating the Flow-Based Redirect Feature
Through Vendor-Specific Attributes
You can provision or activate a traffic class service with the Flow-Based Redirect feature by adding the
following vendor-specific attribute (VSA) in the user profile of the RADIUS server:
vsa cisco 250 ACF_SERVICE
You can activate a traffic class service with the Flow-Based Redirect feature for an established session through
the RADIUS Change of Authorization (CoA) feature, using the following VSAs:
vsa cisco 250 S<sessionID>
vsa cisco generic 1 string "subscriber:command=activate-service"
vsa cisco generic 1 string "subscriber:service-name=ACF_SERVICE"
You can deactivate a traffic class service with the Flow-Based Redirect feature for an established session
through the RADIUS CoA feature, using the following VSAs:
vsa cisco 250 S<sessionID>
vsa cisco generic 1 string "subscriber:command=deactivate-service"
vsa cisco generic 1 string "subscriber:service-name=ACF_SERVICE"

Configuring Flow-Based Redirect for a Traffic Class Service

The following steps show how to configure the Flow-Based Redirect feature for a traffic class service.
SUMMARY STEPS
1. enable
2. configure terminal
3. ip access-list extended traffic class
4. permit tcp source_IP destination_IP eq port
5. class-map type traffic match-any traffic class map
6. match access-group input name traffic class
7. policy-map type service policy-map name
8. class type traffic traffic class map
9. reroute to next-hop ip IP address
10. policy-map type control policy-map name
11. class type control always event account-logon
12. 20 service-policy type service name service-policy name
13. class type control always event service-stop
14. 1 service-policy type service unapply identifier service-name
15. class type control always event service-start
16. 10 service-policy type service identifier service-name
17. class type control always event account-logoff
18. 10 service disconnect delay 5
Intelligent Wireless Access Gateway Configuration Guide
82
Flow-Based Redirect
OL-30226-03