Table of Contents
Advertisement
if you are using a Cook
Power other than high.
When the cooking
time
ends, "End" will show on the
Display
and 4 beeps will
sound. (You can stop the
beeping
by opening
the
door or by touching
CAN-
CEL.) "End" will remain on
the Display
and a reminder
tone will sound every 30
seconds
until the door is
opened
or CANCEL is
touched.
The Display
will
then show the time of day.
NOTE: If the oven light and fan come on when you touch START, the
Start flme feature has not been set correctly.
Open and close the door,
reprogram
the cooking sequence
and START TIME, then touch START.
Additional
information
l
Additional
cycles
can be set when using START TIME to start cooking
at a
later time. Follow instructions
under the proper
heading
(Using AUTO SET,
Cooking
with the Temperature
Probe, Defrosting,
Using KEEP WARM) before
you program
START TIME.
l
You
can
change tlme,
or
add cycles
at any time during the Start Time
cycle.
1. Touch the cycle
you wish to change
or add.
2. Touch Number
Pads for new time.
3. Touch COOK POWER, if desired.
4. Touch number
of new Cook Power, or touch COOK POWER again
if High
is desired.
5. Touch START. The oven will cook at the new time and Cook Power.
l
Opening
the door does not stop the START TIME operation.
CAUTION: Use foods that will not go bad or spoil while waltlng for cooking
to start. Avold using with milk or eggs, cream soups, cooked meafs, poultry
or flsh, or any Item with baklng powder or yeast.
Smoked or frozen meats may be used; so can vegetables,
frults and
casserole-type
foods.
Any food that has to walt for cooklng to start should be very cold or frozen
before It Is put In the oven. MOST UNFROZEN FOODS SHOULD NEVER STAND
AT ROOM TEMPERATURE MORE THAN TWO HOURS BEFORE COOKING STARTS.
Advertisement
Table of Contents
