Table of Contents
Advertisement
DO THIS...
THIS HAPPENS...
I.
Put food in the oven, plug in the
temperature
probe and close ihe door.
2.
Touch TEMP
(NOTE: If you
want to use the
preset temper-
ature and Cook
Power, skip to
step 6.)
0 1
3. Touch a Number
Pad for the new
temperature
you
want from 110°F to
190°F.
II m . . .
4.
Touch COOK
POWER (NOTE: if
you want to cook
at 70% power,
skip to step 6.)
5. Touch a Number
Pad for the Cook
Power you want.
6. Touch START.
continued
on next page
The AUTO SET Indicator
Light will come on and the
Display
will show 165°F [or
the temperature
you have
programmed
as your fa-
vorite cycle).
NOTE: HIGH
Cook Power is pre-set on
this setting only.
The Display
will show what
you touched
in degrees
Fahrenheit.
This example
shows you touched
Number
Pad 4 for a final
cooked
temperature
of
140°F.
NOTE: Cook Power
of 70% is preset on TEMP
settings 1-9.
The COOK POWER lndicatol
Light will come on and
the Display
will show "P-70:'
This shows the oven is pre-
programmed
to cook at
70% of full power (MED-
HIGH].
The Display
will show what
you touched.
This example
shows you touched
Number
Pad 5 for 50% of
full power.
The AUTO SET and PROBE
TEMP indicator
Lights will
stay on. The Display
will
show "COOL" to show the
food is less than 90°F. As
the food cooks the Display
will show the internal
temperature
of the food
for every 5°F increase.
For 2 of every 10 seconds,
the Display
will show the
Cook Power you
selected,
if you are using
a Cook Power other than
high.
1
Advertisement
Table of Contents
