Troubleshooting - Sony DVP-SR200P Reference Manual

Information

Troubleshooting

If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
The power is not turned on.
c Check that the power cord is connected
securely.
There is no picture/picture noise appears.
c Re-connect the connecting cord securely.
c The connecting cords are damaged.
c Check the connection to your TV and switch
the input selector on your TV so that the signal
from the player appears on the TV screen.
c The disc is dirty or flawed.
c Press [/1 to turn off the player, and enter
"369" using the number buttons on the remote,
then press [/1 to turn on the player again.
There is no sound.
c Re-connect the connecting cord securely.
c The connecting cord is damaged.
c The player is in pause mode or in Slow-motion
Play mode.
c The player is in fast forward or fast reverse
mode.
The remote does not function.
c The batteries in the remote are weak.
c The remote is not pointed at the remote sensor
on the player.
c When you operate the player by pressing
buttons on the remote in sequence, press the
buttons within 5 seconds of each other.
The disc does not play.
c The disc is turned over.
Insert the disc with the playback side facing
down.
c The disc is skewed.
c The player cannot play certain discs.
c The region code on the DVD (digital video
disc) does not match the player.
c Moisture has condensed inside the player.
c The player cannot play a recorded disc that is
not correctly finalized.
8
The player does not operate properly.
c When static electricity, etc., causes the player
to operate abnormally, unplug the player.
The disc tray does not open and "
(LOCKED (locked)) appears on the front
panel display.
c Child Lock is set (page 5).
The disc tray does not open and
" " (TRAY LOCKED (tray locked))
appears on the front panel display.
c Contact your Sony dealer or local authorized
Sony service facility.
"C13" appears on the front panel display.
c Clean the disc with a cleaning cloth or check
its format.
"C31" appears on the front panel display.
c Re-insert the disc correctly.
"