Additional Information; Troubleshooting - Sony DVP-NS41P Operating Instructions Manual

Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer (For customers in the USA only).
Power
Thepower is not turnedon.
Check that the power cord is colmected
securely.
Picture
There is no picture/picture noise appears.
Re-comlect the connecting cord securely.
The connecting cords are damaged.
Check the connection to your TV (page 17)
and switch the input selector on yore- TV so
that the signal from the player appears on
the TV screen.
The disc is dilty or flawed.
If the picture outpm from yotu- player goes
through your VCR to get to yore- TV or if
you are connected to a combination TVi
VIDEO player, the copy-protection signal
applied to some DVD programs could affect
picture qualily'. If you still experience
problems even when you connect your
player directly to your TV try connecting
your player to yottr TV's S VIDEO input
(page 17).
You have selected "PROORESSIVE
AUTO" or "PROGRESSIVE VIDEO"
using the PROGRESSIVE button on the
front panel (the PROGRESSIVE indicator
lights up) even though your TV cannot
accept the progressive signal. In this case.
select "NORMAL (INTERLACE)" so that
the PROGRESSIVE indicator turns off.
Even if your TV is compatible with
progressive format 480p signals, the image
may be affected when you set the player to
progressive format. In this case, select
"NORMAL (INTERLACE)" using the
PROGRESSIVE button on the front panel
so that the PROGRESSIVE indicator turns
offand the player is set to normal (interlace)
format.
The picturedoes not fill the screen, even
thoughthe aspectratio is set in "TV TYPE"
under "SCREENSETUP."
The aspect ratio of the disc is fixed on your
DVD.
Sound
There is no sound.
Re-colmect the connecting cord securely.
The colmecting cord is damaged.
The player is connected to the wrong input
jack on the amplifier (receiver) (page 20).
The amplifier (receiver) input is not
correctly set.
The player is in pause mode or in Slow-
motion Play mode.
The player is in fast for_ ard or I'ast reverse
mode.
If the audio signal does not come through
the DIGITAL OUT (COAXIAL)jack,
check the audio settings (page 63).
While playing a Super VCD on which the
audio track 2 is not recorded, no somld will
come out _ hen you select "2:STEREO,''
"2: l/L," or "2:2/R."
Sounddistortionoccurs.
Set "AUDIO ATT" in "AUDIO SETUP" to
"ON" (page 62).
The sound volume is low.
The sound volume is low on some DVDs.
The sound vokune may improve if you set
"AUDIO DRC" in "AUDIO SETUP" to
"TV MODE" (page 62).
Set "AUDIO ATT" in "AUDIO SETUP" to
"OFF" (page 62).
64