Sony DVP-SR200P Reference Manual page 7

BACKGROUND: Selects the background
color or picture on the TV screen. If you set
"JACKET PICTURE," even though the disc
does not contain a jacket picture, the
"GRAPHICS" picture appears.
BLACK LEVEL: Selects the black level (setup
level) for video signals output from the jacks
other than COMPONENT VIDEO OUT
(component video out).
BLACK LEVEL (COMPONENT OUT):
Selects the black level (setup level) for video
signals output from the COMPONENT VIDEO
OUT (component video out) jacks.
PROGRESSIVE (COMPONENT OUT
2
ONLY)* : Set to "ON" if your TV accepts
progressive format signals. When you select
"ON," set also the following "MODE
(PROGRESSIVE)" and "4:3 OUTPUT."
MODE (PROGRESSIVE): If you select
"AUTO," the player detects the format (film-
based or video-based), and converts to the
appropriate version.
4:3 OUTPUT: This setting is effective only
when you set "TV TYPE" to "16:9." Select
"FULL" when you can change the aspect ratio
on your TV.
CUSTOM SETUP
AUTO STANDBY: Sets the Auto Standby
setting on or off. If you select "ON," the player
enters standby mode when left in stop mode for
more than 30 minutes.
AUTO PLAY: When set to "ON," the player
automatically starts playback when the player is
turned on by a timer (not supplied).
PAUSE MODE: Selects the picture in pause
mode. Normally select "AUTO." When the
picture is output in high resolution, set to
"FRAME." (DVD (digital video disc) only)
TRACK SELECTION: Gives the sound track
which contains the highest number of channels
priority when you play a DVD VIDEO (digital
video disc, video) on which multiple audio
formats (PCM (pulse code modulation), DTS
(digital theater system), or Dolby Digital
format) are recorded. If you select "AUTO,"
priority is given. (DVD VIDEO (digital video
disc, video) only)
MULTI-DISC RESUME: Switches the Multi-
disc Resume setting on or off. Resume playback
can be stored in memory for up to 6 different
DVD VIDEOs (digital video disc, video)/
VIDEO CDs (video compact disc). If you start
the settings again, the resume point is cleared.
(DVD VIDEO (digital video disc, video)/
VIDEO CD (video compact disc) only)
AUDIO SETUP
AUDIO DRC (Dynamic Range Control)*
Set according the surrounding environment. Set
to "TV MODE" when the smallest sounds are
indiscernible, or set to "WIDE RANGE" when
the listening environment is good, for example,
in a home movie theater.
3
DOWNMIX* : Switches the method for
mixing down to 2 channels when you play a
DVD (digital video disc) which has rear sound
elements (channels), or is recorded in Dolby
Digital format. Normally select "DOLBY
SURROUND."
DIGITAL OUT: Selects if audio signals are
output via the DIGITAL OUT (COAXIAL)
(digital out, coaxial) jack. When you select
"ON," set also the following "DOLBY
DIGITAL," "DTS," or "48kHz/96kHz PCM."
DOLBY DIGITAL: Selects the type of Dolby
Digital signal. Set to "D-PCM" when the player
is connected to an audio component without a
built-in Dolby Digital decoder.
DTS: Selects the type of DTS (digital theater
system) audio signal. Set to "ON" when you
play a DVD VIDEO (digital video disc, video)
with DTS (digital theater system) sound tracks.
Do not set to "ON" when you connect the player
to an audio component without a DTS (digital
theater system) decoder.
48kHz/96kHz PCM: Selects the sampling
frequency of the digital audio output signal.
(DVD VIDEO (digital video disc, video) only)
1
When you select "OTHERS t," select and
*
enter a language code. See "Lista de códigos de
idiomas" at the end of this manual.
2
* If the picture does not appear normally or goes
blank, reset the setting. Press [/1 to turn off,
enter "369," and then press [/1 to turn on the
player again.
3
* This function affects the output from the
following jacks:
– AUDIO OUT L/R (audio out left/right) jacks.
– DIGITAL OUT (COAXIAL) (digital out,
coaxial) jack only when "DOLBY
DIGITAL" is set to "D-PCM."
3
:
7