Table of Contents
Advertisement
Additional Information
Troubleshooting
If a problem occurs while operating the
player, use this troubleshooting guide to help
remedy the problem before requesting
repairs. If the problem persists, consult your
nearest Sony dealer.
Power
The player does not turn on even when you
press on the remote or the player.
• Turn off the player and disconnect the AC
power cord (mains lead). Wait for more than
30 seconds, then reconnect the AC power
cord (mains lead) and turn on the player.
Picture
No picture or the picture is not output
correctly.
• Check that all the cables are securely
connected (page 10).
• Switch the input selector on your TV to
display the signal from the player.
• Reset the [Output Video Resolution] to the
lowest resolution by pressing (stop),
HOME, and then POP UP/MENU button on
the remote.
• Try the following: Turn the player off and
on again. Turn the connected equipment
off and on again. Disconnect and then
reconnect the HDMI cable.
• The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
• Check the [Output Video Resolution]
settings in [Screen Settings] (page 17).
• For Ultra HD Blu-ray/BD-ROM/DVD-ROM/
Data content, check the [24p Output]
settings in [Screen Settings] (page 17).
• For 4K output, please make sure that the
player is connected to 4K display that
supports HDCP2.2 capable HDMI input
using Premium High Speed HDMI Cable or
High Speed HDMI Cable that supports 18
Gbps bandwidth (page 10).
22
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
• When [Control for HDMI] in [HDMI Settings]
is set to [On] (page 20), the display
language on the screen automatically
switches according to the language setting
of the connected TV (if you change the
setting on your TV, etc.).
Sound
No sound or the sound is not output
correctly.
• Check that all the cables are securely
connected (page 10).
• Switch the input selector on your Sound
Bar/AV amplifier (receiver) so that the audio
signals of the player are output from your
Sound Bar/AV amplifier (receiver).
• If the audio signal does not come through
the HDMI OUT jack, check the audio settings
(page 18).
• For HDMI connections, try the following:
Turn the player off and on again. Turn
the connected equipment off and on again.
Disconnect and then reconnect the HDMI
cable.
• For HDMI connections, if the player is
connected to a TV through a Sound Bar/AV
amplifier (receiver), try connecting the
HDMI cable directly to the TV. Also refer to
the instruction manual supplied with the
Sound Bar/AV amplifier (receiver).
• The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
• The device connected to the HDMI OUT jack
does not support the audio format of the
player. Check the audio settings (page 18).
The HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio,
DTS-HD Master Audio, Dolby Atmos
*2
DTS:X
) is not output by bitstream.
• Set [BD Secondary Audio] in [Audio
Settings] to [Off] (page 19).
• Check that the Sound Bar/AV amplifier
(receiver) is compatible with each HD Audio
format.
*1
Dolby Atmos is a trademark of Dolby
Laboratories.
*2
DTS:X is a registered trademark and/or
trademark of DTS, Inc. in the United States
and/or other countries.
*1
and
Advertisement
Table of Contents
