8051 Firmware Upgrade Prodedure - Optoma EW536 Service Manual

5-7 8051 Firmware Upgrade
Procedure
1. Execute 8051 FW Program
- Double click "NLINK V1.2" to execute NLINK
program.
2. Choose the right type of MCU
- "MCU Choose" picture will appear on the screen,
select "N79A901R".
- Click "OK".
3. Choose 8051 file (*.hex)
- "Manley Nlink" picture will appear on the screen.
- Ensure "MCU" is the one you chose in the last step
(as green square).
- Click "Open".
- Select the 8051 file where you put the file in, then
click "Open".
EW536/HD66/DW318 Confidential
5-13