Optoma EW536 Service Manual page 30

No Symptom
Poor Uniformity/
9
Shadow
Dead Pixel/Dust
10
(Out of spec.)
11 Garbage Image
Remote Control/
1
Control Panel Failed
13 Function Abnormal
14 Audio Abnormal
- Ensure the projection screen without dirt
- Ensure the projection lens is clean
- Ensure the Brightness is within spec.
- Check rod alignment
- Check Engine Module
- Ensure the projection screen without dirt
- Ensure the projection lens is clean
- Clean DMD Chip and Engine Module
- Check DMD Chip
- Check Engine Module
- Ensure that the signal cables and source work as well
- Check Main Board
- Check DMD Board
- Remote Control
a. Check Battery
b. Check Remote Controller
c. Check IR Sensor Board
d. Check Main Board
- Control Panel
a. Check FPC
b. Check Keypad
c. Check Main Board
- Do "Reset (All data)" of the OSD Menu
- Check Main Board
- Check DMD Board
- Ensure that the signal cables and source are work as well
- Ensure that your Projector is not in "Mute" mode
- Check the interior Speaker of the projector
- Check the exterior Speaker that you are using
- Check Main Board
EW536/HD66/DW318 Confidential
Procedure
3-4