Optoma EW536 Service Manual page 48

4. Click "Library".
- Click the "Browse" and navigate to
the directory where you put the DLP
Composer installation files in.
- Click "Library 9.2" folder.
- Click "OK".
5. Click "Communications".
- Select "Serial Port", then click "Configure".
6. "Serial Port Configuration" picture will
appear on the screen.
- Make sure the settings are as below:
(1) In "Baud Rate" item, select "115200".
(2) In "Data Bits" item, select "8".
(3) In "Stop Bits" item, select "1".
(4) In "Parity" item, select "None".
(5) In "RTS" item, select "Enable".
(6) In "CTS" item, select "Disable".
(7) Key in "4000" into "Read" and "Write"
items of "Timeouts (in milliseconds)".
- Click "OK".
7. Click "OK".
EW536/HD66/DW318 Confidential
5-5